showstack / hardware / green-go-beltpack
Green-GO Digital Intercom
Fully networked intercom in which every device is an equal peer on a standard ethernet network with no central matrix at all — the configuration lives in the devices. Powered over ethernet, and priced so a small venue can own a real intercom system.
Protocols it speaks
| Protocol | Direction | Notes |
|---|---|---|
| aes67 | bidirectional | Depending on model and firmware. |
| dante | bidirectional | On specific interface models. |
Connectors
- etherCON or RJ45 with PoE
- Headset connector
What to watch for
It is a real network load. Give it a properly configured switch with PoE budget, not a desk hub.
Peer-to-peer configuration means the settings are distributed. Back up the configuration file before a show, not after.
Sources
- Green-GO Digital — Green-GO primary
Understand the mechanism
Something wrong, or missing?
Known gaps on this entry: released. If you can source one of them, that is a ten minute pull request.
Edit this entry on GitHub — one file, editable in your browser, and your handle goes on it permanently.
Work at Green-GO (ELC)? Confirm or correct this entry — it is free, it stays free, and nothing about it is for sale.