showstack / hardware / enttec-din-ethergate-mk2
ENTTEC DIN Ethergate MK2
DIN-rail ethernet-to-DMX gateway for installed work, where the node belongs in a distribution board rather than in a rack. Two universes, configured over a web interface.
Protocols it speaks
| Protocol | Direction | Notes |
|---|---|---|
| art-net | bidirectional | Both ports. |
| sacn | bidirectional | Both ports. |
| dmx512 | bidirectional | Two universes. |
| rdm | bidirectional | Depending on firmware. |
Connectors
- 2x DMX (terminals)
- Ethernet
What to watch for
DIN-rail devices end up behind locked panels. Record the IP address somewhere that is not only on the device.
Sources
- ENTTEC — ENTTEC primary
Understand the mechanism
Something wrong, or missing?
Known gaps on this entry: released. If you can source one of them, that is a ten minute pull request.
Edit this entry on GitHub — one file, editable in your browser, and your handle goes on it permanently.
Work at ENTTEC? Confirm or correct this entry — it is free, it stays free, and nothing about it is for sale.